Autosamplers

H2

HT3000A has been engineered for maximum performance and reliability.
The new system takes advantage of today’s latest technology to deliver even greater reliability, performance and flexibility.


The HT3000A is the most compact autosampler on the market, with a near to-zero requirement for bench space, while offering a top-class sample capacity. The HT3000A sample rack can be removed for sample loading or preparation, or for storage elsewhere.

Image description

HT3000A Liqiuds autosampler

HT3000


The system is fully self-contained and can be easily installed on all the GC and GC/MS systems available in the market, because of flexibility and modular configuration. It can be configured to serve up to two injectors in most supported GCs.
 

The rotating tower leaves the injector port free for manual injection or maintenance. In addition to avoiding any complicated sample vial transfer procedures, this approach keeps the samples away from any heated source. In fact, the sample rack is mounted away from the GC oven to prevent exposure to high temperatures, which could cause degradation or condensation in the sample vial.

Air


Analysing fewer samples? Get precision and performance with a system that is perfectly sized for your needs. The HT3100A offers automation for processing up to 15 unattended samples.
Quick setting of the autosampler parameters can be done by the free PC control (HTA Autosampler Manager), provided together with the HT3100A, while all the routine operations such as analysis start, sample loading and extra wash can be managed by its dedicated keypad.

H2+Air

HT2000H Headspace autosampler

The robotic vial processing operation allows for sample analysis in a straightforward and systematic way.
The sample vials are transported into the heated six-position incubator for preconditioning.
The sample is simultaneously heated and shaken, in order to facilitate the state change and to reach the equilibrium. A heated, gas-tight syringe is then moved over the incubator and the headspace sample is withdrawn. After sample injection, the syringe is automatically cleaned, by purging with inert gas.

HG 6.0

HT4000A sample prep station

HT4000A's liquid handling head is equipped with a syringe that ranges from 500 nanolitres to 10 mililitres: for larger volume requirements, multiple dispensation cycle or peristaltic pump modules can be integrated. HT4000A definitively allows a wide range of sample volume to be handled. HT4000A offers aspiration, dispensation, sample displacing, serial and parallel dilution, single and multiple derivatisation, pH spiking, reagent and standard addiction. Regardless of whether your sample or solvent is extremely volatile or viscous, we provide you with the capability you need to perform the tasks effectively.

 

HT4000L LC autosampler

 

Easy to use, easy to install and easy to service. We believe in a “robust by design” approach: HT4000L – based on cutting edge technologies and DFX design – well incarnates this philosophy making itself the ideal instrument for installation in any scenario.
Full loop is performed with very high accuracy values, while partial loop also allows sample saving. The variable fill speed and the viscosity delay allow a wide range of sample viscosities; programmable sampling depth assures high sample recovery capacity.

HT1500L HPLC autosampler

Image description

HT1500L comes with HTA Autosampler Manager (Standard Version), our complementary software control for autosampler programming. After setting your method once, just need to load samples and press START: experience a seamless integration.

Image description

HT1000I ICP-OES,
ICP-MS and AAS.

LCMS

HT1000I offers easy setup and operation: for line priming, end-of-session washes and setup it features an integrated keypad, while for sample processing it can be controlled by the most popular ICP and AAS software. The carousel and the arm – that holds the sample probe – rotate in order to align the first sample tube to be processed. The probe is then inserted at the programmable depth; at that point, the sample is aspirated by the analyzer through the inert flowpath.

Custom GC Autosamplers

Image description
HTA’s GC autosampler offering is
the widest and the most complete
in the market: we offer six models
to answer different needs in terms of
injection techniques - standard liquid
injection, headspace or solid-phase
microextraction (SPME) - and sample
capacities - from 15 to in excess of 200
samples.

 

Despite our wide range, we recognize that laboratories occasionally have needs that do not find an answer in the standard autosampler models offered by HTA or their GC manufacturer. In the past - when those special needs arose - laboratories were obliged to perform manual injections or to opt for expensive and complex all-in-ones autosamplers that – besides offering the required automation – include and charge for functionalities that are not needed. Now we offer you the final and most effective solution for your custom needs: a custom autosampler!

Image description